124198

: Screw the 124198 flange onto the NPT threads of your sight pipe or swivel mount.

: The 124198 is a medium-sized screw usually paired with parts 124197 and 124199. 124198

: Align the detector's viewing window with the flange opening. : Screw the 124198 flange onto the NPT

This part is a 1-inch NPT internal thread mounting flange used to connect ultraviolet flame detectors (like the or C7961 series) to a sight pipe. This part is a 1-inch NPT internal thread

: Use the 124198 screw to anchor the bottom of the gas piston (strut) to the bed frame.

: Hand-tighten initially to ensure alignment, then use the provided IKEA hex key to secure it firmly. Warning: Do not over-tighten, as this can strip the pre-drilled holes in the particle board. Other Possible References

: Ensure the sight pipe is cut to the shortest practicable length and angled to fit flush with the combustion chamber wall. Installation :