Nad Phono Preamp Pp2 Manual Apr 2026

: Never connect the PP 2 to an input marked "PHONO" on your receiver, as this will cause severe distortion.

Ensure the turntable's ground wire is securely attached to the PP 2 . Nad Phono Preamp Pp2 Manual

: If your turntable has a separate ground wire, secure it to the GND thumb screw on the back of the PP 2 to minimize hum. : Never connect the PP 2 to an

If you encounter issues, refer to the following common solutions: : If you encounter issues, refer to the following

The is a compact, low-noise device designed to add a turntable to modern amplifiers or receivers that only have "Line-Level" inputs (like CD, AUX, or Tuner). It supports both Moving Magnet (MM) and Moving Coil (MC) cartridges via separate inputs and a rear selector switch. 1. Setup & Installation

: Connect the external 24V power supply to the PP 2 and plug it into a wall outlet. A green LED on the front panel indicates the unit is powered. 2. Technical Specifications