Hold the system vertically (tip down), apply negative pressure for 30 seconds, then release to neutral to allow contrast to fill the lumen. Never use air to inflate the balloon, as it causes uneven expansion or rupture. 3. Deployment Guidelines
The 316L stainless steel stent can cause artifacts in MRI scans due to magnetic field distortion. g60492.mp4
Attach a saline-filled syringe to the port labeled "W" and flush until fluid exits the distal tip. Hold the system vertically (tip down), apply negative
Use an appropriately sized introducer sheath (typically 6 Fr to 8 Fr depending on the stent diameter) to minimize resistance. 4. Safety Warnings Deployment Guidelines The 316L stainless steel stent can
The device is sterile for one procedure only ; do not resterilize or reuse.
outside the U.S.). This device is a balloon-expandable stent used primarily to treat aortoiliac occlusive disease .