: If using an acrylic riser, stack the riser layers and secure them with four 20mm screws.
: Attach layer 7 to the bottom of layer 6 using four 8mm screws at the bottom front. anime-av4
: Use the included cotton gloves and microfiber cloth to keep the acrylic clean and free of fingerprints. Assembly Steps : : If using an acrylic riser, stack the
: Plug a USB cable into the PCB to test all sockets with tweezers before installing. Ensure the firmware is up to date via IV WORKS downloads. Assembly Steps : : Plug a USB cable
: The top layer is 1 and counts down to 7 at the bottom. Preparation :
: Focus on evolving Cu , Ichigo , and Vegita early on. Evolved units like Hollowseph are essential for clearing story and challenge stages. Resource Grinding :